ELGO

High-resolution magentic measuring system for absolute position measurement in dynamic applications. Ideally suited in linear drives.

• High-resolution - up to 1 µm
• Operation speed up to 10 m/s
• For measuring lengths up to 8 m
• Interfaces: SSI, CANopen (DS406), CAN BASIC ELGO (CNO), adressable RS422
• Additional incremental square-wave signals (A, B) or analog signal output Sin/Cos (1 Vss) in real-time for highly dynamic control (option)
• High safety during installation and operation by visual (LED) and signal output error message in case the max. allowable reading distance to scale is exceeded
• Typical applications: linear actuators, pick&place, medicine technology

• Absolute measurement
• High quality guide car with integrated sensor, guide rail with magnetic tape
• For measuring lengths up to 1 meter
• High resolution (1 µm)
• Optionally, incremental square wave signals (A, B) and sine-cosine-signals (1 Vss) for dynamic movement control

• Absolute measuring
• Resolution 0.01 mm
• No calibration necessary - changes of position are also recognized in zero-current period
• With LED and SSI error-bit in case of too large distance sensor-tape
• Measuring length up to 10 m (EMAX), 20 m (EMAL)
• Incremental square- or sine-cosine signals for dynamical movement control

• No referencing necessary
• Direct measuring
• Measuring lengths up to 650 mm
• High resolution of 0.01 mm
• Repeating accuracy ± 0.01 mm
• Insensitive to dust and dirt
• Interfaces: RS232, RS422, SSI and CANopen
• Easy installation

Specifications:

• Resolution 1 mm
• Repeat accuracy ± 1 mm
• Measuring length up to 262 m
• CANopen interface
• Robust housing (IP67)

• Resolution 0.01 mm (at 4-edge triggering)
• Repeat accuracy ± 0.001 mm
• Speedproportional output of square-waves signals

EMIX1

• Small sensor head with external electronic interpolation

EMIX1

• Small sensor with integrated electronic interpolation and index pulse
• The installation of the sensor can be effected vertical or horizontal